As with all mechanical devices in the home, garage doors must be serviced regularly to ensure that they continue to function as designed. Unfortunately, most homeowners do not know that springs and other mechanical components for commercial doors or doors require routine maintenance and safety checks.
To keep your garage door in top condition, you must maintain the lubrication and inspection of the high voltage spring system, which is one of the most important parts for safe and precise door operation. Twisted springs are also the clearest cause for concern if you have difficulty opening or closing them.
Torsion springs are held under very high pressure and wound very tightly. Because of this high voltage, even the highest quality steel springs wear out over time and eventually tear. Because of the possibility of this sudden break, torsion springs must be inserted to avoid serious injury or property damage. These limits are in the form of cables or for doors with roller shutters made from outer steel tubes. Even if they are included and you have an old door, it is recommended to check it regularly by a professional garage door repair Simi Valley. The springs must be replaced if necessary.
Many garage doors above the ground have two separate springs mounted. If only one is damaged, don’t replace it, not the other one. Both springs must be replaced at the same time, although good springs can show signs of fatigue. You can bet your bottom dollar that the others will not be far behind if one fails.
You might have a garage door where springs rustle or mumble loudly when the door is raised or lowered. This does not mean that the spring or door is on the back foot and needs to be replaced. The problem can often be solved simply by spraying a lubricant like WD-40 or the like.
Another sign that your garage door needs to be inspected and repaired is if a cable strip is torn and damaged. Regardless of the quality of the door, this is a sign that the cable will break. Sudden breakage of a garage door torsion cord spring can result in serious injury. These drop cables must be checked and, most likely, replaced by professional service technicians who are familiar with spring problems and cable damage.
Because of the high load they must lift, torsion springs are exposed to extreme loads, which makes adjustments dangerous. If you find a spring disrupting the function of your door, don’t try to make it yourself.
It is a good idea to schedule an annual maintenance inspection of your garage door by a registered service technician. This avoids the risk of potential injury and gives you peace of mind that the door is functioning properly and safely at all times.